- Contact Person : Mr. Lang Allen
- Company Name : Hangzhou Kulon Electronics Co., Ltd.
- Tel : 0086-571-85003730
- Fax : 0086-571-85003737
- Address : Zhejiang,Hangzhou,16F,West Times Building, N0.518 Dengyun Road,Hangzhou,China
- Country/Region : China
- Zip : 310011
MEANWELL 250W 3.6V UL&CB&CE SINGLE OUTPUT,LED DRIVER,SWITCHING POWER SUPPLY/SMPS
Related Product Searches:MEANWELL 250W 3.6V UL&CB&CE SINGLE OUTPUT,LED DRIVER,SWITCHING POWER SUPPLY/SMPS,High Quality 3.6V power supply,3.6V power supply HSP-250-3.6
3.6V power supply, 250W, PFC function, Mean Well
FEATURES:
Universal AC input / Full range
Built-in active PFC function, PF>0.95
High efficiency up to 87%
Protections: Short circuit / Overload / Over voltage/Over temperature
Forced air cooling by built-in DC fan
1 U low profile 41mm
Conformal coated
Built-in cooling fan ON-OFF control
Built-in remote sense function
3 years warranty
SPECIFICATION:
MODEL | HSP-250-3.6 | |
OUTPUT | DC VOLTAGE | 3.6V |
RATED CURRENT | 50A | |
CURRENT RANGE | 0~50A | |
RATED POWER | 180W | |
RIPPLE&NOISE(max.) Note2 | 100mVp-p | |
VOLTAGE ADJ. RANGE | 3.24~3.96V | |
VOLTAGE TOLERANCE Note3 | ±2.0% | |
LINE REGULATION | ±0.5% | |
LOAD REGULATION | ±1.0% | |
SETUP, RISE TIME | 3000ms, 50ms/230VAC 3000ms, 50ms/115VAC at full load | |
HOLD UP TIME (Typ.) | 16ms/230VAC 16ms/115VAC at full load | |
INPUT | VOLTAGE RANGE | 85~264VAC 120~370VDC |
FREQUENCY RANGE | 47~63Hz | |
POWER FACTOR (Typ.) | PF>0.95/230VAC PF>0.98/115VAC at full load | |
EFFICIENCY (Typ.) | 83% | |
AC CURRENT (Typ.) | 2A/115VAC 1A/230VAC | |
INRUSH CURRENT (typ.) | 35A/115VAC 70A/230VAC | |
LEAKAGE CURRENT | <1.2mA/240VAC | |
PROTECTION | OVER LOAD | 105~135% rated output power |
Protection type: Hiccup mode, recovers automatically after fault condition is removed | ||
OVER VOLTAGE | 4.14~4.86V | |
Protection type: Shut down O/P voltage, re-power on to recover | ||
OVER TEMPERATURE | 80±5°C (TSW2) detect on heatsink of power transistor; 80±5°C (TSW2) detect on heatsink of output transistor | |
Protection type: Shut down O/P voltage, recovers automatically after temperature goes down | ||
FUNCTION | FAN CONTROL | RTH3≥60±10°C FAN ON; RTH3≤40±10°C FAN OFF |
ENVIRONMENT | WORKING TEMP. | -40~+70°C (Refer to “Derating Durve”) |
WORKING HUMIDITY | 20~90% RH non-condensing | |
STORAGE TEMP., HUMIDITY | -40~+85°C, 10~95% RH | |
TEMP. COEFFICIENT | ±0.03%/°C(0~50)°C | |
VIBRATION | 10~500Hz, 2G 10min./1 cycle, 60min. each along X,Y,Z axes | |
SAFETY& EMC | SAFETY STANDARDS | UL60950-1, TUV EN60950-1 approved |
WITHSTAND VOLTAGE | I/P-O/P:3kVAC I/P-FG:1.5kVAC O/P-F/G:0.5kVAC | |
ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-F/G: 100M Ohms / 500VDC / 25°C / 70%RH | |
EMC EMISSION | Compliance to EN55022(CISPR22)ClassB, EN61000-3-2,-3 | |
EMS IMMUNITY | Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2, heavy industry level, criteria A | |
OTHERS | MTBF | 179.7K hrs min. MIL-HDBK-217F(25°C) |
DIMENSION | 199x105x41mm(LxWxH) | |
PACKING | 0.97Kg; 16pcs/16.5Kg/0.87CUFT | |
NOTE | 1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. 2.Ripple&Noise are measured at 20MHz of bandwidth by using a 12’’ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3.Tolerance: includes set up tolerance, line regulation and load regulation. 4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 5.Derating may be needed under low input voltages. Please check the static characteristics for more details. | |
